GUTTER DRIP INTERNAL CORNER

STEP 1

Create an effective corner (ready for Gutter Trim Internal Corners to be fitted) by butt-joining two lengths of Integra Trim Gutter Trim where they meet at an internal right angle.

Make sure to leave a 4mm expansion gap.

STEP 2

Apply superglue to ONE inside edge of the Gutter Trim Internal Corner component.

(Only one side is superglued to allow for any expansion of the joined lengths of Raised Kerb Trim.)

STEP 3

Apply uPVC superglue activator to the Gutter Trim corner area where the superglued inside edge of the Internal Corner component is to be affixed.

STEP 4

Firmly press the Internal Corner component down and into the Gutter Trim butt-joined corner and hold in place until adhesion is solid.