Contact Bonding Adhesive – Shed Rubber

INSTALLATION GUIDE For the best results, ensure the roof surface is cleared of any debris or dirt. Make sure the contact bonding adhesive is mixed thoroughly before use. Unfold the EPDM membrane across the shed roof, ensuring that it is placed on it equally. If parts overhang, you can use a pair of EPDM scissors to remove any excess. Roll one side of EPDM membrane half-way. Apply the contact bonding adhesive along the parameter of the roof deck surface. Do not put an excess amount in one area. Ensure the roof deck has complete coverage of the water-based deck adhesive. Place the EPDM membrane back and press down firmly. You can use a roller to remove any air bubbles or creases. Repeat this for the other side of the shed roof. Depending on weather conditions, the adhesive should take around one hour to cure. To ensure the adhesive doesn’t dry out prematurely, we recommend applying the adhesive in stages and gradually rolling the membrane back down towards the edge of the roof.