Flat Roof Extension Kit – Falls To The Front

Flat Roof Extension Kit

Flat Roof Extension Kit – Falls To The Front

£313.63£892.85 + VAT

In stock
FROM £313.63 ex VAT

Extension Roof Kit – Falls to the Front



We have designed these roof kits for where a flat roof meets a house wall on the far back and the gutter is on the front

Included in Kit:

  • 1.14m FlexiProof One-Piece EPDM Membrane (Size per kit chosen)
  • Water Based Adhesive to adhere membrane to the centre of the roof deck
  • Contact Bonding Adhesive to adhere to the Perimeter of roof deck to membrane
  • Wall Flashing Trim to flash the membrane against a house wall
  • Gutter Drip Trim (including Joiners & Fixings)
  • Check Kerb (including Joiners & Fixings)
  • Corner Profiles
  • EPDM Flashing Tape Patches & primer for both back corners where the deck meets the house wall
  • DIY Installation Kit

The Membrane size provided will be the same as the kit size. Therefore, your roof size will need to be smaller to allow for overhang e.g., 2.5m x 2.8m roof kit will fit an actual roof size no larger than 2.2m x 2.5m

Additional information

Kit Size (D X W)

3.5m x 7.5m, 4m x 3.8m, 7.6m x 4m, 7.6m x 5.5m, 7.6m x 5m, 7.6m x 6m, 2m x 2m, 3m x 9m, 3.5m x 9m, 2.5m x 2.5m, 3m x 2m, 3m x 3m, 3.5m x 3.5m, 3m x 4m, 4m x 4m, 4m x 4.5m, 4.5m x 4.5m, 4m x 5m, 4.5m x 9.5m, 4m x 5.5m, 4m x 7m, 4m x 9m, 3.5m x 4.5m, 5.5m x 4m, 5.5m x 5.5m, 5m x 10m, 5m x 4.5m, 5m x 5m, 5m x 6m, 5m x 8m, 6.5m x 5.5m, 3m x 5m, 3m x 6m, 3m x 7m, 3m x 8m, 4m x 7.6m, 4.5m x 6.5m, 6.1m x 6.5m, 6.1m x 7.5m, 4m x 3.5m, 4m x 6.5m, 4m x 7.5m, 3m x 10m, 3m x 11m, 3m x 12m, 3m x 3.5m, 4.5m x 10m, 4.5m x 11m, 4.5m x 12m, 4.5m x 3.5m, 4.5m x 7.5m, 4.5m x 7m, 4.5m x 9m, 5.5m x 3.8m, 5m x 3.8m, 6m x 10m, 6m x 11m, 6m x 12m, 6m x 3.5m, 6m x 5.5m, 6m x 5m, 6m x 6.5m, 6m x 6m, 6m x 7.5m, 6m x 7m, 6m x 8m, 6m x 9m, 7.5m x 3.8m, 7.5m x 5.5m, 7.5m x 5m, 7.5m x 6.5m, 7.5m x 6m, 7.5m x 7m, 2.5m x 4.5m, 3.5m x 6m

Trim Color

Black, Anthracite Grey