EPDM Roofing Calculator

USING TERMINATION BARS TO JOIN TO OTHER ROOFS

Training hub – all your questions answered!

For the best results, please follow the instructions as detailed below.
If you still have questions please feel free to contact us using the form here…

STEP 1

Overlap the FlexiProof EPDM membrane onto the adjoining flat roof system by 60 mm.

using termination bars to join to other roofs 1 | Rubber Roofing Direct
using termination bars to join to other roofs 2 | Rubber Roofing Direct

STEP 2

Lift up the FlexiProof EPDM membrane to expose the adjoining roof system and apply a thick bead of water block mastic the length or the overlap.

STEP 3

Flap the FlexiProof membrane onto the water block mastic and fit the termination bar over the top using self sealing screws to create a compression seal.

using termination bars to join to other roofs 3 | Rubber Roofing Direct
using termination bars to join to other roofs 4 | Rubber Roofing Direct

STEP 4

Remove any excess membrane using a craft knife and seal off the termination bar edge using EPDM edge sealant.

Please note! When joining to existing felt with embedded stones ensure all stones are removed back to a smooth surface prior to application of water lock mastic. In the case of jointing to other single-ply roofs and EPDM ensure existing surfaces are cleaned using membrane cleaner.