EPDM Roofing Calculator

PITCHED ROOF SLOPES ONTO THE FLAT ROOF

Training hub – all your questions answered!

For the best results, please follow the instructions as detailed below.
If you still have questions please feel free to contact us using the form here…

STEP 1

Carefully strip 3 courses of tiles from the adjoining roof and remove the roofing battens.

Carefully lift the existing pitched roof underlay and apply contact adhesives to the back of the EPDM membrane and to the roof lay board.

Once the contact adhesive has tacked off stick the EPDM membrane to the layboard.

pitched roof slopes onto the flat roof 1 | Rubber Roofing Direct
pitched roof slopes onto the flat roof 2 | Rubber Roofing Direct

STEP 2

Lap the roof underlay over the top of the EPDM membrane and re-attach the tile battens.

STEP 3

The top of the EPDM membrane must be at least 300 mm up behind the bottom of the lowest tile

pitched roof slopes onto the flat roof 3 | Rubber Roofing Direct