Call Us : 01306 776626
Rubber Roofing Direct
Trade /DIY supplier

of EPDM rubber roof systems, kits and accessories

SECURE PAYMENT GUARANTEES

Shop with us and your card details will be 100% secure

NEXT DAY DELIVERY

Value for money. On orders placed before 2pm

APPROVED TECHNICAL SUPPORT

Professional help and advice from experienced flat roofers

Contact Bonding Adhesive
Availability: In Stock
Excl. VAT: £8.50 Incl. VAT: £10.20

Used for bonding of the EPDM rubber roofing membrane at angle changes and verticals to absorbent and non-absorbent surfaces.

Qty:

+ -
Add to basket

Be the first to review this products

  • Product Info
  • Installation
  • Things You Will Need

FLEXI PROOF™ Contact Bonding Adhesive is a high strength solvent contact bonding adhesive that is designed and manufactured to withstand the temperature extremes of many flat roofing installations.


This contact bonding adhesive should be used to secure edges of the EPDM Membrane and any up stands or angle changes. FLEXI PROOF™ Contact Bonding adhesive can be suitable for a wide range of surfaces e.g brickwork, timber, metal, GRP and concrete


For commercial installations over 100 square meters, the entire roof area should be fully bonded with FLEXI PROOF™ Contact Bonding Adhesive 


The FLEXI PROOF™ Contact Bonding Adhesive is great for bonding EPDM membranes to horizontal and vertical roofs. Best applied with a solvent resistant roller; no other specialist tools required.


You can see more of our Flexi Proof™ products here.


Caution:
Keep away from heat and flame and ensure good ventilation 


Coverage:
1L covers approx 1 to 2 square meters
2.5L covers approx 4 to 5 square meters
5L covers approx 7 to 10 square meters

Preparation:



  • Roofing surfaces should be clean and free from dust, grease and loose materials.

  • The surface of timber and composite boards must be sound and not degraded.

  • Ensure adhesive is stirred before use.

  • Being in storage of temperatures over 30°C for long periods of time can affect quality.


Application:



  • Applied using a short pile roller or brush to achieve a thin coating on both surfaces. A larger quantity of adhesive is necessary for open texture and rough surfaces.

  • Before bonding the materials, ensure the solvent content is evaporated. Time may range from approx. 5 to 15 minutes after application assuming average UK weather conditions.

  • Take time to align the Flexi Proof™ to the surface to be mated. Apply pressure using a roller to remove any trapped air.

  • Trim away any excess membrane.