Welcome! It looks like it's your first visit. Enjoy 5% off your first order with code RRDFEB2019. Min Order £250+VAT

 
Rubber Roofing Direct
Trade /DIY supplier

of EPDM rubber roof systems, kits and accessories

SECURE PAYMENT GUARANTEES

Shop with us and your card details will be 100% secure

NEXT DAY DELIVERY

Value for money. On orders placed before 2pm

APPROVED TECHNICAL SUPPORT

Professional help and advice from experienced flat roofers

Contact Bonding Adhesive
Availability: In Stock
Excl. VAT: £8.50 Incl. VAT: £10.20
Contact Bonding Adhesive is used to secure the edges of the EPDM membrane and any upstands.
Excl. VAT: £8.50 Incl. VAT: £10.20

Qty:

+ -

Add to basket

Be the first to review this products

  • Product Info
  • Installation
  • FAQ
  • Things You Will Need

Polygomma® Contact Bonding Adhesive


Polygomma® Contact Bonding Adhesive is a high strength solvent adhesive that is designed to splice the joints and to bond the EPDM Roof Membranes and Pond Liners.


This should be used to secure edges of the EPDM Membrane and any up stands.


This Contact Bonding Adhesive is perfect for protecting structures from leakages. Applying the Polygomma® Contact Bonding Adhesive is quick, clean and safe. No specialist equipment needed.


You can see more of our Polygomma® products here.


Technical



  • Manufacturer: Polygomma

  • Life Expectancy: 50+ Years

  • UV Exposure: Pass

  • Resistance to Ozone: Pass

  • Shelf Life: 12 months from the date of manufacturing


Caution: Keep away from heat and flame.


Stir well before use. Apply and use in dry conditions.

Installation Process



  • The surface that the Contact Bonding Adhesive is being applied too should be cleaned and dry.

  • It is very important to buff the splice joints/surface of the membrane that needs to be bonded.

  • The application of the Polygomma® Contact Bonding Adhesive should be poured onto the surface and spread with a rubber blade/wiper. You should ensure that it is applied evenly and covers the area. This should e allowed to dry for 5-10 minutes.

  • The two surfaces should be pressed well to get a strong bond.

  • We recommend that you use a roller across the surface. This ensures that there are no bubbles or trapped air. For the best possible results, apply some weight onto the surface.

How long does the Contact Bonding Adhesive take to set?
The time it takes is dependent on the porosity of the surface. The maximum bond strength is estimated to occur after 24-48 hours.


Do I need any specialist tools?
No specialist tools are required for its application. We have a wide range of products such as; a roller set, a brush and primer that is needed to ensure the Contact Bonding Adhesive is applied properly.


Does Polygomma or Rubber Roofing Direct provide a guarantee?
Rubber Roofing Direct provides a 20-year contractor warranty on all Polygomma membranes. More information can be found here.


How should Polygomma® Contact Bonding Adhesive be stored?
The Contact Bonding Adhesive should be stored with the lid of the container closed tightly, and stored in a covered area and away from direct sunlight.


Please take a look at our FAQs section for more information.

Although there are no specialist tools required, we recommend the use of the following tools for successful installation.