CUSTOMER UPDATE | PLEASE READ OUR LATEST UPDATE
Sheds are an important part of our home, often storing expensive equipment like mowers and strimmer’s. Yet all too often they rely on cheap, thin felt to keep them weather tight. Well, not any more! We have standard size rubber roofing shed roof kits compromised of 1 piece EPDM Rubber roof sheet and the adhesive to complete the job.
Our rubber roofing shed kits are ideal for new builds as an upgrade to the provided felt or as a replacement roof for existing sheds or outbuildings.
Each Shed Kit Contains
2.5m x 3.9m of 1.14mm Shed Rubber EPDM Membrane Sheet
Water Based Deck Adhesive and an adhesive roller
Our Rubber Roof Kits are designed to fit standard garden shed sizes. Whilst we have allowed enough excess membrane to the width and length, please check the sizes against your own shed as sizes differ between shed manufacturers.
If you need advice or have any questions. Do not hesitate to get in touch on 01306 776626.
FREE NEXT WORKING DAY DELIVERY ON ALL SHED KITS
Ensure that your deck surface is clean, dry, frost free and free from dust, grease, loose material and other contaminants.
Unwrap the EPDM Rubber Roof Membrane and place unfolded on the shed roof, ensuring you have equal coverage.
Wait for approximately half an hour for the EPDM to relax.
Fold back half of the EPDM Rubber Roof Membrane onto itself to expose the timber deck underneath.
Apply the WBA Deck Adhesive evenly over the roof deck with the Roller supplied.
With the adhesive still wet, roll the membrane back into position using a soft broom to ensure no air is trapped underneath the membrane and to ease out any creases. Repeat the process for the other half of the roof.